1000A 24V electrolytic polishing rectifier

Features

• Product Specifications: 1000A 24V Electrolytic Polishing Power Supply
• Input Voltage: Three-phase 380V
• Operating Mode: Constant current/constant voltage mode selectable
• Output Voltage: DC 0-24V
• Output Current: 0-1000A
• Display Accuracy: 0.1A, 0.1V
• Product Function: With single-cycle timing (1-9999 seconds or minutes selectable), output stops after timing completes
• Cooling Method: Air cooling

Electrolysis Model Selection
Model	Output current A	Output voltage V	Power KW	Input current A	Input voltage v	Weight (KG)	Length L * Width W * Height H (mm)
Electrolytic stripping of electronic pins
DJ40006	4000	6	24	40	380	110	620*450*920
DJ50006	5000	6	30	50	380	130	620*500*1150
DJ60006	6000	6	36	60	380	150	620*500*1150
DJ600012	6000	12	72	120	380	150	620*500*1150
DJ600018	6000	18	108	180	380	180	620*5001150
DJ600036	6000	36	216	360	380	200	800*1150*1300
Electrolytic copper recovery, copper extraction from etching solution
DJ50036	500	36	18	30	380	70	510*580*680
DJ50060	500	60	30	50	380	80	510*580*680
DJ100030	1000	30	30	50	380	60	400*520*630
DJ200024	2000	24	48	80	380	80	450*520*920
DJ250018	2500	18	45	75	380	80	400*520*630
DJ300018	3000	18	54	90	380	80	400*520*630
DJ600024	6000	24	144	240	380	160	500*620*1150
Electrolytic plasma polishing, high-voltage polishing power supply
DJ30350	30	350	10.5	18	380	50	450*500*300
DJ50350	50	350	17.5	29	380	70	450*500*300
DJ100400	100	400	40	67	380	130	580*510*1150
DJ100500	100	500	50	83	380	150	580*510*1150
DJ100600	100	600	60	100	380	150	580*510*1150
DJ10400	10	400	4	7	380	50	450*500*300
DJ10500	10	500	5	8	380	70	450*510*320

Introduction

Electropolishing is a method that uses electrolysis to anodize metal components, thereby improving their surface finish. Electropolishing is a chemical reaction process that uses electric current to dissolve a thin layer of metal ions into an electrolyte solution. During polishing, the metal component acts as the anode, and a lead plate or stainless steel plate acts as the cathode, both placed in an electrolyte solution under direct current. Advantages

• Consistent color inside and out, long-lasting gloss, and can smooth out concave areas that cannot be polished by machine.
• High production efficiency and low cost.
• Increases the corrosion resistance of the workpiece surface and is suitable for all stainless steel materials.

Advantages

Case Studies